Demo. This is a one page demo of what a larger site would look like.Get a site like thisSee all designs
Brookside ComfortHeating and Cooling Call (816) 555-0134
New Systems in Kansas City

Replace Your Furnace and AC Once, and Right

We size every new HVAC system in Kansas City with a real load calc, show you three honest options, and put the full price on paper before you decide.

Size My House
Brookside Comfort installer showing a couple their new condenser beside a brick bungalow
1 day

Most furnace and AC swaps are done by dinner.

Load calc on every quote No sizing by the old label.
Three options, side by sideGood, better, best. You pick.
Price on paper firstNothing added after install day.
10 year parts and laborOn every system we install.

What Size System Does Your House Need?

Answer four quick questions. You get a starting size and a price range for each option. It takes about 30 seconds and no one will call you unless you ask.

1,850
When was the house built?
What heats and cools it now?
Where is the house?
3ton system

About 80,000 BTU of heat for 1,850 square feet.

Rebates and tax credits vary by model, by year and by your home. We check what applies at the visit and show it on your quote.

Systems Built for Kansas City Weather

Humid summers, icy Januarys and a lot of old houses. Here is what we put in, and why.

Tech fitting vent pipes on a new high efficiency furnace in a basement

Furnace and AC Together

The classic setup for a Kansas City basement. We match the furnace and AC so they work as one system, not two strangers.

  • High efficiency gas furnaces up to 98%
  • Central AC 14.3 to 20 SEER2
  • Typical install 1 day
Two installers leveling a new heat pump beside a craftsman house

Heat Pumps and Dual Fuel

A heat pump cools all summer and heats on mild days. Pair it with a gas furnace and it hands off when the cold snaps hit.

  • Cold climate heat pumps work to 5°F
  • Dual fuel with gas backup very common here
  • Typical install 1 to 2 days
Tech mounting a ductless mini split in an attic bedroom

Ductless Mini Splits

Great for the hot attic bedroom, a finished basement or an old house with a boiler and no ducts. Each room gets its own control.

  • One to five rooms per outdoor unit
  • No new ductwork small wall opening
  • Typical install 1 day
Installer sealing a sheet metal duct joint with mastic

Ducts, Cleaning and Sealing

A new system on leaky ducts is money out the window. We test, seal and clean the ducts so the air ends up in the rooms you paid to heat.

  • Duct leak testing with every quote
  • Duct cleaning whole house
  • Mastic sealing not just tape

From Brookside to the Northland

Tap a photo to see it big. On your site these are your own install photos.

New condenser beside a Kansas City bungalow Comfort advisor going over options with homeowners Furnace install in a limestone basement Heat pump install beside a craftsman home Mini split in an attic bedroom Duct sealing with mastic
Service Area

Both Sides of State Line

We install across the metro, from the Northland down to Belton. A full site gives each town its own page.

Missouri Side

Kansas City, Lee's Summit, Independence, Liberty, Blue Springs, Gladstone and Raytown

Kansas Side

Overland Park, Olathe, Prairie Village, Leawood and Shawnee

What Homeowners Say

4.9
★★★★★264 Google reviews

Three companies quoted us. Brookside was the only one that measured the windows and went in the attic. They said we needed a smaller unit, not a bigger one.

Karen W. Prairie Village

The quote had three columns and every price was on it. No pressure. We picked the middle one and the house has never been this even.

Marcus T. Lee's Summit

Out with the 1994 furnace and in with a heat pump in one day. They vacuumed the basement before they left.

Jenny H. Liberty

Sample reviews written for this demo. Your site shows your real Google reviews, word for word.

Before You Replace

Still unsure? Call and ask for Dana. She will answer straight, even if the answer is to wait a year.

How do you size a new system for my house?

We do a room by room load calc, called a Manual J. We measure windows, check the attic insulation and look at which way the house faces. The estimator on this page gives you a starting point, and the load calc sets the final size.

Should I get a heat pump in Kansas City?

Many homes here do well with a heat pump paired with a gas furnace. The heat pump covers mild days and the furnace takes over when it drops below freezing. We will tell you if your house is a good fit or not.

How long does a replacement take?

Most furnace and AC swaps take one day. A switch to a heat pump or new ductwork can take two. We lay down floor covers, haul the old unit away and walk you through the new thermostat before we leave.

Are there rebates or tax credits?

Sometimes. Utility rebates and federal tax credits change by year, by model and by your home. We check what applies to your system at the visit and show it on your quote. We do not promise a rebate before we know.

Do you offer financing?

Yes. We offer monthly payment plans on approved credit. We show the cash price and the monthly price side by side so you can pick what works.

Get Three Options on One Page

A free visit takes about an hour. You keep the quote, even if you go with someone else.

Call (816) 555-0134
SEER2 is the cooling efficiency score on the yellow label. A higher number uses less power for the same cool air.
Built to keep heating well in deep cold. Most regular heat pumps lose steam below about 25°F.
A room by room count of how much heat your house gains and loses, called a Manual J. It sets the size, not the old label.

Book a Free Visit

Dana calls you to set a time. The visit takes about an hour and you keep the quote.